Transmission systems, in automotive, is a system that became conductor of energy from the engine to the differential and ace. By rotating axles, the wheels can rotate and move the car.Transmission is needed because the combustion engine is commonly used in cars is an internal combustion engine that produces rotation (rotation) between 600 to 6000 rpm. Meanwhile, the wheel rotates at a speed of rotation between 0 to 2500 rpm.
Today, there are two transmission systems are common, namely a manual transmission and automatic transmission. There are also transmission systems which are a combination of both systems, but this is the last new developments can be found on high-tech cars and only certain brands. Manual transmission is one type of transmission is widely used by grounds maintenance easier. Usually on the transmission of the manual consists of 3 to 7 speed.
Semi-automatic transmission is a transmission that can make us feel the system can be manual or automatic transmission, when we're using a manual transmission system we do not need the clutch because the clutch pedal transmission system is already organized automatically. Automatic transmission consists of three main parts, namely: Torque converter, Planetary gear units, and hydraulic control unit. Torque converter serves as an automatic clutch and the engine can enlarge moment. While the torque converter consists of Pump impeller, turbine runner, and the stator. The stator is located between the impeller and turbine. Torque converter is filled with ATF (Automatic Transmition Fluid). The moment the machine is moved by the fluid flow.
Transmission systems, in automotive, is a system that works for the conversion of torque and speed (revolutions) of the engine torque and speed to be different to be forwarded to the final drive. This conversion is changing the high rotational speed becomes lower, but more powerful
Torsi a machine generally occurs in about half of the allowable limit of engine speed, while the vehicles require high torque at start moving. In addition, vehicles that run on roads that climb requires a higher torque than the car that runs on a flat road. Vehicles that run on low speed requires a higher torque than high speed. With the operating conditions are different then the transmission system is needed to power requirements can be met by the machine.
Manual transmission is automotive transmission system that requires its own driver to push / pull like the motorcycle or the clutch as the car and swap the acceleration gear manually. Acceleration of the teeth arranged in the gear box / gerbox for several speeds, typically ranging from 3 gear acceleration forward up to six advanced gear acceleration combined with a reverse gear (R).
Acceleration of the teeth that is used depends on the speed of the vehicle at low speed or climbing gear used and so that the acceleration of a higher speed, and vice versa if you reduce the speed of acceleration gear down, braking can be helped with a reduction gear acceleration.
No comments:
Post a Comment